What is ECO-SHIELD Rapid-Fire?

The Benchmark for Winter Safety Excellence

The Benchmark for Winter Safety Excellence

ECO-SHIELD Rapid-Fire is a superior deicing product designed to increase the melting power with a rapid fire more powerful than salt brine alone. Providing residual and longer lasting protection from freeze bond to pavement and significantly reducing the corrosion rate vs. traditional sodium chloride brine. ECO-SHIELD Rapid-Fire concentrate uses a unique blend of Carbohydrates/Corrosion Inhibitors which was developed to prevent tracking with deicing professionals in mind looking to maximize the effectiveness of sodium chloride brine. ECO SHIELD Rapid-Fire is a high-performance, odorless, translucent enhancer specifically engineered to improve the melting capacity of traditional chloride deicers by slowing the rate of ice re-crystallization as the brine becomes diluted. Some Ingredients have been used for over 20 years and trusted by deicing professionals across North America, giving ECO-SHIELD engineered performance you can count on for consistent and reliable performance with every use.

Order ECO-SHIELD Rapid-Fire

ECO-SHIELD Rapid-Fire Key Features

Key Features of ECO-SHIELD Rapid-Fire

Ice Management Products Built for Extreme Conditions

ECO-SHIELD Rapid-Fire is engineered to be a flexible Ready-MIX tool for deicing professionals. Made from environmentally friendly and reliable products.

  • ECO-SHIELD Rapid-Fire improves the viscosity vs sodium chloride brine which helps:
    • Reduce fugitive sodium chloride dust and increase the operational window of sodium chloride brine when used as an anti-icer.
    • Helps reduce bounce and scatter for onboard prewet systems.
    • Reduces leaching when used as stockpile treatment.
  • ECO-SHIELD Rapid-Fire improves the melting capacity of sodium chloride brine which lowers the working temperature of the brine to help maximize the brines potential.
  • ECO-SHIELD Rapid-Fire is 40% less corrosive than sodium chloride brine.
  • ECO-SHIELD Rapid-Fire can be used at reduced application rates compared to traditional sodium chloride brine, without sacrificing performance.
  • ECO-SHIELD Rapid-Fire improves operational efficiency by allowing snow removal crews to cover more ground with the same amount of product.
  • ECO-SHIELD Rapid-Fire offers a less corrosive alternative which increases the operational effectiveness when used for frost prevention compared to straight salt brine.
Order ECO-SHIELD Rapid-Fire

Optimized Use Across Winter Operations

Designed for Every Stage of Winter Response

ECO-SHIELD Rapid-Fire is designed for flexibility depending on your needs, including anti-icing, de-icing, frost prevention, pre-wetting of solids or stockpile treatment.

Anti-icing

When used for anti-icing operations, application rates of 25-30 gallons per lane mile are typical. ECO-SHIELD Rapid-Fire is designed to improve the melting capacity and keep the sodium chloride brine on the surface longer, maximizing your brines melting power. ECO-SHIELD Rapid-Fire when used as an anti-icer, will help prevent snow and ice from bonding to the pavement at lower temperatures than straight sodium chloride brine. Please follow best practices when anti-icing. It is important to know pavement temperature, air temperature and humidity before any anti-icing application. Additional training can be provided.

Deicing

In direct deicing applications, 50+ gallons per lane mile is recommended depending on the thickness of the snowpack. ECO-SHIELD Rapid-Fire, when applied using direct stream nozzles, can help penetrate the snowpack and remove the bond of the snow and ice with the pavement much faster than traditional sodium chloride brine and rock salt. This allows for faster removal of the snowpack with a plow which increases operational efficiency and reduces the amount of chemical needed to reach bare pavement.

Frost Prevention

Similar to anti-icing, ECO-SHIELD Rapid-Fire can be applied to tricky areas that tend to freeze first or are susceptible to frost when a storm is not imminent. Due to the improved viscosity of ECO-SHIELD Rapid-Fire, frost prevention applications can last several days under the right conditions.

Pre-wetting

As a pre-wetting agent, ECO-SHIELD Rapid-Fire can be used at rates from 5-15 gallons per ton of granular material, depending upon the solid used and the performance objective. When added at the spinner, ECO-SHIELD Rapid-Fire can improve the rate at which the rock salt penetrates the snowpack by initiating the liquification of the solid faster, especially at lower temperatures. ECO-SHIELD Rapid-Fire will also reduce the bounce and scatter keeping the rock salt where it is needed.

Stockpile Treatment

ECO-SHIELD Rapid-Fire is an effective for stockpile treatment due to the improved viscosity of the brine. Treating a stockpile with 5-8 gallons of ECO SHIELD Rapid-Fire per ton of granular material greatly enhances the performance of the stockpile, especially at colder temperatures. The increased performance, along with the reduced bounce and scatter experienced when using a wetted solid, translates into a reduction in the amount of material required. Due to the added corrosion inhibition, treating salt with ECO-SHIELD Rapid-Fire reduces the corrosion of infrastructure and equipment caused by rock salt. Similar to using ECO-SHIELD Rapid-Fire in a pre-wetting system, the rock salt will penetrate the snowpack faster.

Ask your sales representative about GCD’s other blends specifically engineered for the liquid treatment of salt for Bagging operations, Bulk Rock Salt and Pile treatments.

Order ECO-SHIELD Rapid-Fire