Multi-Purpose Ice Control Solutions
Solutions Designed for Every Winter Condition
ECO-SHIELD is designed for flexibility depending on your needs, including anti-icing, de-icing, frost prevention, pre-wetting of solids or stockpile treatment.
Anti-icing
When used for anti-icing operations, application rates of 18 – 30 gallons per lane mile are typical. ECO-SHIELD is designed to improve the melting capacity and keep the sodium chloride brine on the surface longer, maximizing your brines melting power. ECO-SHIELD, when used as an anti-icer, will help prevent snow and ice from bonding to the pavement at lower temperatures than straight sodium chloride brine. Please follow best practices when anti-icing. It is important to know pavement temperature, air temperature and humidity before any anti icing application. Additional training can be provided.
Deicing
In direct deicing applications, 50+ gallons per lane mile is recommended depending on the thickness of the snowpack. ECO-SHIELD, when applied using direct stream nozzles, can help penetrate the snowpack and remove the bond of the snow and ice with the pavement much faster than traditional sodium chloride brine and rock salt. This allows for faster removal of the snowpack with a plow which increases operational efficiency and reduces the amount of chemical needed to reach bare pavement.
Frost Prevention
Similar to anti-icing, ECO-SHIELD can be applied to tricky areas that tend to freeze first or are susceptible to frost when a storm is not imminent. Due to the improved viscosity of ECO-SHIELD, frost prevention applications can last several days under the right conditions.
Pre-wetting
As a pre-wetting agent, ECO-SHIELD can be used at rates from 5-15 gallons per ton of granular material, depending upon the solid used and the performance objective. When added at the spinner, ECO-SHIELD can improve the rate at which the rock salt penetrates the snowpack by initiating the liquification of the solid faster, especially at lower temperatures. ECO SHIELD will also reduce the bounce and scatter keeping the rock salt where it is needed.
Stockpile Treatment
When blended at the 20% addition rate to sodium chloride brine, ECO SHIELD is an effective for stockpile treatment due to the improved viscosity of the brine. Treating a stockpile with 4-6 gallons of ECO-SHIELD per ton of granular material greatly enhances the performance of the stockpile, especially at colder temperatures. The increased performance, along with the reduced bounce and scatter experienced when using a wetted solid, translates into a reduction in the amount of material required. Due to the added corrosion inhibition, treating salt with ECO-SHIELD reduces the corrosion of infrastructure and equipment caused by rock salt. Similar to using ECO-SHIELD in a pre-wetting system, the rock salt will penetrate the snowpack faster. Ask your sales representative about GCD’s other blends specifically engineered for the liquid treatment of salt for Bagging operations, Bulk Rock Salt and Pile treatments.
Order ECO-SHIELD